3.METHODS OF SETTING
21
(Example 3) For setting the 1/4 scale division display to OFF (Setting from choices)
This operation can be performed by the following procedure.
* However, it is assumed that setting mode 3 has already been selected.
1) Select the setting item.
(Since the setting item number of the 1/4 scale division display is 7, press the key.)
2) Press the key.
3) Move with the key until the digit you want to set blinks. ( )
→→ →
7
OVER
CNG/ENT CNG/ENT
ZERO ZEROZERO
Present setting value
Setting mode number
Setting item number
The setting mode number, setting
item number, and present setting
value are displayed.
kg
,
Present setting value
Setting mode number
Setting item number
The highest digit of the setting
value blinks.
kg
,
kg
,
Not defined
Setting mode number
Setting item number
1/4 scale division display
Decimal place
Display frequency
ZERO
Subdisplay selection
Every time the key is pressed,
the blinking digit moves to the lower one.
To Next Page
Loading...
Need help?
General
