Universal Robots UR16e

EU Declaration of Incorporation (DOI) (in accordance with 2006/42/EC Annex IIB) original EN
Model : UR3e, UR5e, UR10e, UR16e (e-Series): Below cited certifications
and this declaration include:
•
Effective October 2020: Teach Pendants with 3-Position
Enabling (3PE TP) & standard Teach Pendants (TP).
•
Effective May 2021: UR10e specification improvement to
12.5kg maximum payload.
Note:This Declaration of Incorporation is NOT applicable when the
UROEMController is used.
Serial Number: Starting 20235000000 and higher
year
e-Series
3=UR3e, 5=UR5e, 3=UR3e, 0=UR10e (10kg), 2=UR10e(12.5),
6=UR16e
sequential numbering, restarting at 0 each year
Incorporation: Universal Robots e-Series (UR3e, UR5e, UR10e and UR16e)
shall only be put into service upon being integrated into a final
complete machine (robot application or cell), which conforms with
the provisions of the Machinery Directive and other applicable
Directives.
It is declared that the above products fulfil, for what is supplied, the following directives as detailed
below: When this incomplete machine is integrated and becomes a complete machine, the
integrator is responsible for determining that completed machine fulfils all applicable Directives and
providing the Declaration of Conformity.
I. Machinery Directive
2006/42/EC
The following essential requirements have been fulfilled: 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.5, 1.2.6, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9,
1.5.1, 1.5.2, 1.5.5, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3, 4.1.3,
Annex VI. It is declared that the relevant technical documentation
has been compiled in accordance with Part B of Annex VII of the
Machinery Directive.
II. Low-voltage Directive
2014/35/EU
III. EMC Directive 2014/30/EU
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used
below.
Reference to the harmonized standards used, as referred to in Article 7(2) of the MD & LV
Directives and Article 6 of the EMC Directive:
UR16e 68 User Manual
2.Part I Hardware Installation Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.