Universal Robots UR16e

Environment
FORCE Technology
Venlighedsvej 4
2970 Hørsholm
Tel.+45 43 25 14 00
Fax
FORCE Technology Norway AS
Nye Vakås vei 32
1395 Hvalstad, Norway
+47 64 00 35 00
+47 64 00 35 01
info@forcetechnology.no
FORCE Technology Sweden AB
Tallmätargatan 7
72134 Västerås, Sweden
+46 (0)21-490 3000
+46 (0)21-490 3001
info@forcetechnology.se
FORCE Technology
Park Allé 345
2605 Brøndby, Denmark
+45 43 25 00 00
+45 43 25 00 10
info@forcetechnology.dk
www.forcetechnology.com
Attestation of Conformity no. 119-29301-A1
Assessment holder
Universal Robots A/S
Energivej 25
5260 Odense S
Denmark
Product identification
UR16e Robot Arm
Controller CB, 3.2 UR10/5 G5
FORCE Technology test reports
Environmental tests of UR16e, project no.: 119-24069, report no.: 119-24069-1 dated 29 April 2019
Other technical documentation
Conclusion
The robot arms have been tested according to the standards listed below. The test results are given in the Force
report listed above. All tests were carried out as specified in the relevant specifications including special test criteria’s
stated by the client.
IEC 60068-2-1:2007
Test Ae; Cold -5 °C, 16 h
IEC 60068-2-2:2007
Test Be; Dry heat +35 °C, 16 h
IEC 60068-2-2:2007
Test Be; Dry heat +50 °C, 16 h
EN 60068-2-64:2008
Test Fh; Vibration (random), 5 – 10 Hz: +12 dB/octave,
10-50 Hz 0.00042 g²/Hz, 50 – 100 Hz: -12 dB/octave,
0.15 grms, 3 x 30 min
EN 60068-2-27:2008
Test Ea; Shock, 11 g, 11 ms, 6 x 9 shocks
IEC 60529:2013
IP5X
IEC 60529:2013
IPX4
Signature
User Manual 75 UR16e
2.Part I Hardware Installation Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.