Universal Robots UR16e

(I) EN ISO 10218-1:2011
TÜV Nord Certificate # 44
708 14097607
(I) EN ISO 13732-1:2008 as
applicable (I) EN ISO
13849-1:2015 TÜV Nord
Certificate # 44 207
14097610 (I) EN ISO
13849-2:2012 (I) EN ISO
13850:2015
(I) (II) EN 60204-1:2018 as
applicable (II) EN
60529:1991+A1:2000+A2:2013
(I) EN 60947-5-5:1997+A1:2005
+A11:2013+A2:2017 (I) EN
60947-5-8:2020 (III) EN 61000-
3-2:2019
(II) EN 60664-1:2007 (III) EN
61000-3-3: 2013 (III) EN 61000-6-
1:2019 UR3e & UR5e ONLY (III)
EN 61000-6-2:2019 (III) EN 61000-
6-3:2007+A1: 2011 UR3e & UR5e
ONLY (III) EN 61000-6-4:2019
Reference to other technical standards and technical specifications used:
(I) ISO 9409-1:2004 [Type
50-4-M6] (I) ISO/TS
15066:2016 as applicable
(III) EN 60068-2-1: 2007
(III) EN 60068-2-2:2007
(II) EN 60320-1:2021 (III) EN
60068-2-27:2008 (III) EN 60068-
2-64:2008+A1:2019
(II) EN 61784-3:2010 [SIL2] (III) EN
61326-3-1: 2017 [Industrial
locations SIL 2]
The manufacturer, or his authorised representative, shall transmit relevant information about the
partly completed machinery in response to a reasoned request by the national authorities.Approval
of full quality assurance system (ISO 9001), by the notified body Bureau Veritas, certificate
#DK015892.
2.11. Warranty
2.11.1. Product Warranty
Direct your warranty inquiries to product related information on myUR
2.11.2. User Manual Disclaimer
UniversalRobotsA/S continues to improve the reliability and performance of its products, and as
such reserves the right to upgrade products, and product documentation, without prior warning.
UniversalRobotsA/S takes every care to ensure the contents of the User Manual/s are precise and
correct, but takes no responsibility for any errors or missing information.
User Manual 69 UR16e
2.Part I Hardware Installation Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.