Universal Robots UR16e

READ MANUAL
Failure to use the robot arm in accordance with the intended use can result
in hazardous situations.
•
Read and follow the recommendations for intended use and the
specifications provided in the User Manual.
Universal Robots robots are intended for industrial use, to handle tools/end effectors and
fixtures, or to process or transfer components or products. For details about the conditions
under which the robot should operate, see Declarations and Certificates and the technical
specifications.
All Universal Robots robots are equipped with safety functions, which are purposely
designed to enable collaborative applications, where the robot application operates
together with a human.
Collaborative applications are only intended for non-hazardous applications, where the
complete application, including tool/end effector, work piece, obstacles and other
machines, is without any significant hazards according to the risk assessment of the
specific application.
WARNING
Using the robot arm outside of the intended purposes can result in injuries.
•
Do not use the robot for any of the below:
•
Any use in hazardous locations or explosive environments.
•
Medical applications with contact or proximity to patients.
•
Any application requiring compliance with specific hygienic
and/or sanitation standards, such as direct contact with food,
beverage and/or pharmaceutical products.
•
Any use or application deviating from the intended use,
specifications, and certifications is prohibited as the result
could be death, personal injury and/or property damage.
UNIVERSAL ROBOTS EXPRESSLY DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY OF FITNESS FOR ANY MISUSE.
WARNING
Avoid modifying the robot. A modification might create unforeseen
hazards. All authorized reassembling shall be done according to the
newest version of all relevant service manuals.
UR16e 18 User Manual
2.Part I Hardware Installation Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.