Universal Robots UR16e

WARNING: HOT SURFACE
Prolonged contact with the heat generated by the robot arm and the Control Box,
during operation, can lead to discomfort resulting in injury.
•
Do not handle or touch the robot while in operation or immediately after
operation.
•
Check the temperature on the log screen before handling or touching the
robot.
•
Allow the robot to cool down by powering it off and waiting one hour.
CAUTION
Failure to perform a risk assessment prior to operation can increase risk of injury.
•
Perform a risk assessment and reduce risks prior to operation.
•
If determined by the risk assessment, do not enter the range of the robot
movement or touch the robot during operation.
•
Read the information found in Risk Management.
CAUTION
Using the robot with untested external machinery, or in an untested system, can
increase the risk of injury to personnel.
•
Test all functions and the robot program separately.
NOTICE
Very strong magnetic fields can damage the robot.
•
Do not expose the robot to permanent magnetic fields.
READ MANUAL
Verify all mechanical and electrical equipment is installed according to the
specifications and warnings found in the Mechanical Interface and in the 2.4.
Electrical Interfaceon page36.
2.1.6. Intended Use
User Manual 17 UR16e
2.Part I Hardware Installation Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.