7-45
Troubleshooting ＞ Self-diagnostic function
[CONFIDENTIAL]
F90X Abnormality detecting in
the extension application
service part
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
F93X Abnormality detecting in
the extension application
management part
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FC0X Abnormality detecting in
system application
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FCAX Abnormality detecting in
Print application
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FD4X Abnormality detecting in
Box application
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FDEX Abnormality detecting in
maintenance application
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FF7X Abnormality detecting in a
report creation part
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
[Controller failure]
Clearance by turning the
power off and on only.
FE9X Abnormality detecting in
the Application System
Management Department
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
FF9X Abnormality detecting in
Service Cooperation
(1) Exchange a Main board and perform an operation check.
(2) Get USBLOG and contact service headquarters.
Since the USB log at the time
of occurrence is needed for
analysis, please give me
cooperation of acquisition.
Numb
er
Contents Verification procedure & check point Remarks
To Next Page
Loading...
