Vacon 100 - Page 141

Table 50: Digital input settings
Index Parameter Default ID Description
P3.5.1.47 Fire Mode Reverse DigIN Slot0.1 1618
Gives a command of reverse rotation
direction during Fire mode. This
function has no effect in normal
operation.
FALSE = Forward
TRUE = Reverse
P3.5.1.48 Auto-cleaning Activation DigIN Slot0.1 1715
Start the Auto-cleaning. The process
stops if the activation signal is
removed before the process is
complete.
NOTE!
If the input is activated, the drive
starts.
P3.5.1.49
Parameter Set 1/2 Selection DigIN Slot0.1 496
OPEN = Parameter set 1
CLOSED = Parameter set 2
P3.5.1.50
User Defined Fault 1
Activation
DigIN Slot0.1 15523
OPEN = No action
CLOSED = Fault activated
P3.5.1.51
User Defined Fault 2
Activation
DigIN Slot0.1 15524
OPEN = No action
CLOSED = Fault activated
NOTE!
Your option board and board setup gives the number of available analogue inputs.
The standard I/O board has 2 analogue inputs.
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in Chapter 11 Appendix 1.
PARAMETERS MENU VACON · 141
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
5