Volvo EC140E - Operator comfort; Operator seat

Operator comfort
Operator seat
The operator seat meets the requirements
according to EN ISO7096. The operator seat is
designed to provide maximum comfort and reduce
vibration to the operator during normal machine
operation.
NOTE!
Adjusting the seat should always be done when the
machine is stationary.
NOTE!
Make sure that no objects are placed within the
moving area of the operator's seat.
WARNING
Risk of serious injury.
Uncontrolled touch of control lever can cause
unexpected movement of machine or parts. This
could result in serious injury.
Always lock the control lockout lever before starting
the engine or before leaving the operator's seat.
NOTICE
Installation and maintenance of the operator seat
may only be carried out by authorised and
competent personnel.
NOTICE
To obtain maximum comfort and eliminate the risk
of accidents, you must make sure that all seat
adjustments have been carried out correctly before
starting the machine.
NOTE!
The seat is intended for use by one seated
occupant only.
V1065656
8
10
9
5
1
4
6
7
3
2
11
12
1 Weight adjustment
2 Fore & aft adjustment, seat cushion
3 Angle adjustment, seat cushion
4 Horizontal adjustment, top seat
5 Horizontal adjustment, top seat and
consoles
6 X-Isolator adjustment (optional
equipment)
7 Height adjustment, consoles
8 Headrest adjustment
9 Backrest angle adjustment
10 Armrest adjustment
11 Lumbar support adjustment
12 Seat heating switch (optional
equipment)
112
Other controls
Operator comfort