Volvo EC140E - Time and engine speed; Hydraulic flow

AdBlue®/DEF level gauge
The gauge shows the level in the AdBlue®/DEF
tank and it has a red mark indicating "AdBlue®/DEF
empty". When the gauge is in this area, the
AdBlue®/DEF left is about 10% of total tank
capacity.
Capacity of AdBlue®/DEF tank, see page
366 .
3 Time and engine speed
Time segment displays the current time. Refer to
page
44 for instructions on how to set current time
on the main screen.
Engine speed screen is displayed when the "Menu
screen" is not shown in the "Main screen". For main
menu screen, see page
44 .
The "Engine speed step" selected on "Engine
speed control switch" is displayed on an engine
speed graph which is a segmented bar graph.
The actual speed is displayed below the engine
speed graph (maximum four-digit number).
When the engine is off, engine speed is displayed
as "0".
NOTE!
Engine speed and work mode may vary according
to the optional equipment.
4 Hydraulic flow
Calculated value for X1 flow option is displayed on
the segment called "Flow segment". Refer to page
44 for flow setting instructions.
V1134963
15:56
G
I
F
H
P
1600 rpm
1
2
3
4
5
1 Joystick shortkey
2 Time
3 Engine speed step
4 Work mode index
5 Actual engine speed
V1134964
l
1
1 Flow rate for X1
40
Instrument panels
Instrument panel, front