Emergency stop switch
NOTE!
Emergency stop switch must be used only in case
of emergency situation.
If it is abused or misused by the operator, it could
cause serious failure of the engine and machine.
Never use the emergency stop switch for the
purpose of shutting off the normal machine.
Turn the ignition switch to the OFF position.
If the engine does not stop or in emergency,
perform the following procedure.
Open cover (1) and push switch (2) upward to
stop the engine.
NOTE!
This switch turns off the engine as well as the
battery disconnect switch at the same time.
Return the switch to the original position. The
engine will be enabled to start.
NOTE!
Do not operate the machine again until the
malfunction has been corrected.
Other controls
Controls
105
To Next Page
Loading...
