Maintenance service, every 250
hours
Swing drive unit
NOTICE
Always clean around the oil dipstick before you
check the oil level. Dirt in the oil damages the swing
gearbox.
It is very important that the oil level is always correct
and that it is checked at working temperature.
-
Too little oil may lead to insufficient lubrication of
the swing drive unit and cause costly damage.
-
Too much oil may lead to oil foaming, and cause
the swing drive unit to overheat.
WARNING
Risk of burns!
Hot liquids and machine parts can cause burns.
Allow the machine to cool before beginning any
service.
306
Maintenance
Maintenance service, every 250 hours
To Next Page
Loading...
