Windows
Front windshield, opening
NOTICE
Move the control lockout lever down to its lower
position before you open or close the windscreen.
1 Lower the attachment to the ground and stop the
engine.
2 Push both buttons (E) in order to unlatch the
windshield from the locked position (G) while
holding both grips (F), and then move the
windshield upward.
NOTE!
Stop lifting as soon as the windshield is unlatched.
3 Hold both grips (F) only and pull the windshield
upward and rearward, and then fix it in the locked
position.
NOTE!
If the windscreen is cracked, it must be replaced
immediately. Contact a qualified service technician
for replacing.
Front windshield, closing
1 Lower the attachment to the ground and stop the
engine.
2 Push the both buttons (E) with holding both grips
(F) to move the windshield out of the lock
position.
3 Grip handle (F) only and pull the windshield
downward slowly.
4 Fix the windshield securely and tighten in the
locked position (G).
Other controls
Operator comfort
121
To Next Page
Loading...
