Hydraulic system
NOTICE
Any work on the hydraulic system requires great
demands on cleanliness. Even very small particles
can cause damage or clog up the system.
Therefore, wipe areas in question clean before any
work is carried out.
The complete hydraulic system including the
pressure-limiting valves is set to the correct values
from factory.
For any work on the hydraulic system and on
pressure-limiting valves the values and tolerances
from the Volvo service manual must be applied,
otherwise the guarantee from the manufacturer will
be void.
Only a qualified service technician is allowed to
work on the hydraulic system.
Safety when servicing
Before service, read
275
To Next Page
Loading...
