WARNING
Risk of severe personal injury.
While working with the hammer flying chips of rock
could cause severe injury.
Provide protective nets for the windscreens. Keep
windows and door closed and prevent persons from
entering the risk zone when operating the hydraulic
breaker.
Main work applications
NOTE!
The machine images in this section are from one of
the excavators. However the guideline is valid for
all excavators.
- Breaking stone
- Demolition work
- Road repairing
The machine is widely used for the demolition of
buildings, breaking road surfaces, tunnelling work,
smashing slag, and breaking or cutting stone.
Press the tool (chisel) firmly onto the surface at a
right angle as shown.
NOTE!
The standard hydraulic breaker must not be used
underwater. If the water fills the space where the
piston strikes the tool, a strong pressure wave is
generated and the hydraulic breaker may be
damaged.
Operating techniques
Hammer
251
To Next Page
Loading...
