Engine air cleaner cover, cleaning
The cover for aircleaner should be cleaned when
the primary filter is cleaned.
WARNING
Risk of hazardous inhalation.
Dangerous dust can lead to serious health
problems.
Always wear personal protective equipment,
including filter mask, eye protection and appropriate
gloves when handling and cleaning the engine
compartment, coolers and air filters.
1 Remove the cover (B) and valve (A) from the air
cleaner.
2 Empty and clean the cover and valve.
3 Reinstall them on the air cleaner.
Radiator and coolers, cleaning
See page
311
.
Coolant level, checking
Check the coolant level when the warning screen
for low coolant level pops up on the IC (Instrument
Cluster), see page
44
.
WARNING
Risk of scalding and severe burns to unprotected
skin.
High-pressurised hot coolant may rush out of
expansion tank and cause severe burns. Before
removing the expansion tank pressure cap:
Shut down the engine.
Allow the engine to cool
Turn the pressure cap slowly to release any
pressure.
1 Position the machine on even, firm and level
ground.
2 Open the engine hood.
3 Check the coolant level.
If the coolant level is lower than "MIN" marking
on the tank, top up the coolant through filler cap
between "MIN" and "MAX" level.
A Vacuator valve
B Cover
A Filler cap
Maintenance
Maintenance service, when required
339
To Next Page
Loading...
