Delayed engine shutdown
(optional equipment- restarting engine when
delayed engine shutdown is activated)
The delayed engine shutdown function controls the
after-cooling of the engine after
the ignition has
been turned off. It ensures that the engine is running
until it is sufficiently cooled and then shuts it down.
Remaining time will be shown in a pop-up message
and it is possible to abort the after-cooling and shut
down the engine directly by pressing the ESC
button. But it is not recommended.
If you abort this function by pressing the ESC button
or via the battery disconnect switch or by using any
emergency stop, this results in a pop-up message
being shown at next start up.
The operator can also
restart engine by turning the
ignition switch to position (1) while countdown is in
progress.
The delayed engine shutdown function is
connected with the automatic engine shutdown
system, which is optional equipment. If both of
functions are activated at the same time, the
delayed engine shutdown is prioritized because of
its important purpose. The battery will be connected
during the entire shutdown phase and the lights will
be turned off, as with normal key shutdown.
Info. pop-up message
A Delayed shutdown
B Remaining time
C Abort with ESC
Results in a pop-up message
Ignition switch
Operating instructions
Stopping
197
To Next Page
Loading...
