Protection from falling or scattering materials
(optional equipment)
Install the necessary protection guards according to
working conditions where falling or scattering
materials are capable of entering the operator's
cab.
FOG (Falling Object Guard) and FOPS (Falling
Object Protective Structure)
FOG and FOPS should be adopted when the
machine is expected to work in an area where
materials are capable of falling to the cab.
Especially, in mining applications, FOG shall be
adopted.
Safety net
Install safety net to minimize the possibility of
breaking windshield when working with a breaker.
The above recommendations are based on
standard working, install the necessary additional
protection guards in accordance with job site
conditions and local government regulations.
Contact authorized Volvo dealer to meet local
regulations.
Any damage can affect the strength of the structure.
Contact a qualified service technician for repairing
safety structure after damage.
Prevent persons from entering or remaining in the
dangerous area.
NOTICE
Check the clearance between bucket and cab or
spill guard by carefully moving the bucket as close
to the cab as possible. The risk of the bucket
knocking against the cab is greater if attachment
quick coupler is used or if the bucket is provided
with lifting eyes.
Other controls
Cab
107
To Next Page
Loading...
