Optional parts
Bucket/grapple valve position
Select the correct position by turning the nut with a wrench.
A Bucket position
B Grapple position
Changing control pattern of the machine (optional equipment)
• Position S: ISO/SAE type
• Position B: Backhoe loader type
WARNING
Risk of serious accidents.
Unfamiliar control patterns could cause confusion
and accidents resulting in serious injury.
Use extreme caution when using the control levers
after changing the control pattern and until you
become familiar with the new pattern.
NOTICE
Selected control pattern is shown on the front
instrument panel. It is important to check this before
using the machine.
Other controls
Controls
103
To Next Page
Loading...
