Volvo EC140E - Anti-theft system, setup menu

Anti-theft system, setup menu
This menu is used for setting up the anti-theft
system. This menu is divided into two sub-menus
as follows.
1
Pin-code menu: The machine owner's PIN code
is required to access this menu. (6 digits)
Read PIN code: This sub-menu allows the
machine owner to read the current PIN code. (4
digits)
Generate random PIN: This sub-menu allows
the machine owner to generate a random PIN
code. (4 digits)
Set PIN code: This sub-menu allows the
machine owner to set a preferred PIN code. (4
digits)
Activate service action: This sub-menu is used
for activating service actions such as moving
the machine, replacing the machine battery and
disconnecting the GPS antenna. This disables
the anti-theft system except for remote
immobilization, no coverage immobilization
and machine serial number check, and the
WECU informs the CareTrack portal. The anti-
theft system will be activated when the ignition
is turned on the next time.
V1137943
0
Anti-theft system
Pin-code menu
Anti-theft system
One-time code
Enter owner PIN code
Enter owner PIN code
V1137944
1 2 3 4
Read PIN code
Generate random PIN
Set PIN code
Activate service action
PIN Code:
PIN Code
V1139550
2 3 4 5
Read PIN code
Generate random PIN
Set PIN code
Activate service action
New PIN Code:
New PIN Code
V1139551
0
Read PIN code
Generate random PIN
Set PIN code
Activate service action
New PIN Code:
New PIN Code
V1139552
Read PIN code
Generate random PIN
Set PIN code
Activate service action
Immobilizer temporarily OFF
Immobilizer temporarily OFF
74
Instrument panels
Display unit