No coverage
- If the WECU has not been connected to the
CareTrack portal for the number of days set by
Volvo's service tool, the machine will be
immobilized.
- The no coverage days warning will appear at
every start with number of remaining days set by
Volvo's service tool.
- The active trigger and no coverage counter can
be reset using a one-time code or Volvo's service
tool.
- If the machine gets a connection to the CareTrack
portal, the machine will be mobilized (de-
immobilized) and the coverage counter is reset.
ECU tampered
- When the machine is turned on, the WECU and
GPMECU1 check the machine serial number of
the other ECUs. If the machine's serial number is
different, the GPMECU1 prevents machine start
immediately and a warning message will appear
on the IC.
- If the WECU is disconnected from key on cable
and the machine is turned on, the GPMECU1
prevents machine start immediately and a
warning message will appear on the IC.
- The warning condition is revoked when the trigger
has disappeared.
V1139554
No coverage
Days before immob: XXX
V1137942
No coverage
Immobilization at next stop
V1139558
Electronic system tampered
Contact service
ECU
Machine inoperable
ECU
V1155510
Anti-Theft system tampered
Machine immobilized
Contact service
Instrument panels
Display unit
73
To Next Page
Loading...
