Volvo EC140E - Page 74

Machine movement
- If the machine moves 100 metres without its own
power, the WECU detects the machine
movement and the machine will be immobilized
and WECU sends the warning message to the
CareTrack portal.
- After the machine has been immobilized, the
warning message will appear on the IC before the
authorization code display.
- The machine owner or dealer can mobilize (de-
immobilize) the machine with codes for Level 2
and Level 3.
Battery power lost
- If the WECU is disconnected from battery power
cable or detects the battery supply voltage lower
than 8 V, the WECU operates on its own internal
battery.
- The GPMECU1 activates machine
immobilization and the red warning message will
appear on the IC.
- WECU sends the warning message to the
CareTrack portal.
- The warning condition is revoked when the trigger
has disappeared.
Remote immobilization
- If dealer (level 3 code owner) requests machine
immobilization in the CareTrack portal, the
remote immobilization warning message will
appear on the IC and the machine is immobilized
at the next stop.
- If machine owner requests machine
immobilization in the CareTrack portal, the
remote immobilization warning message will
appear on the IC and the machine is immobilized
at the next stop.
V1139556
Machine immobilized
V1137938
Electronic sys power lost
Contact service
ECU
Machine will be inoperable
ECU
V1137939
Remote immobilization
activated by level 3
Immobilization at next stop
V1137940
Remote immobilization
activated by owner
Immobilization at next stop
72
Instrument panels
Display unit