Volvo EC140E - Bucket, installing

Bucket, installing
WARNING
Risk of crushing!
Attachments that move unexpectedly can cause
injuries.
Make sure people stay out of the working area when
connecting or disconnecting attachments.
1 Park the machine on even, firm and level
ground.
2 Press down to release the red lock device (A) on
the right-hand attachment quick coupler switch
and then press the switch to position (1) to
initiate the attachment quick coupler.
When the attachment quick coupler is initiated,
the buzzer sounds and the check message and
indicator are displayed in the IC (Instrument
Cluster). See page
79 for more information.
3 Press the left-hand attachment quick coupler
switch for more than 0.7 seconds to open the
attachment quick coupler. The switch is returned
automatically. See page
36 for more information.
NOTE!
When the attachment quick coupler is open, the
buzzer sounds and the warning message and
indicator are displayed in the IC (Instrument
Cluster).
0
1
V1134968
A
Attachment quick coupler switch, right
1
V1140835
Attachment quick coupler switch, left
V1147254
WARNING
Quick coupler unlocked
Warning! Quick coupler unlocked
Operating techniques
Attachments, connecting and disconnecting 231