Volvo EC140E - CareTrack with anti-theft; CareTrack with anti-theft (optional equipment)

CareTrack with anti-theft
CareTrack with anti-theft (optional
equipment)
CareTrack with anti-theft function works by WECU,
web portal, Volvo's service tool (Tech Tool),
GPMECU1, and IC (Instrument Cluster). The anti-
theft function is to immobilize the machine
according to the following conditions.
- Wrong code alarm
- Geofence broken
- Timefence broken
- System tampered
- Machine movement
- Battery power lost
- Remote immobilization
- No coverage
- ECU tampered
Machine immobilized information
This screen is to warn the operator when the
machine is immobilized. To get more information
about the message on the screen, press the
SELECT button. To go back to the previous screen,
press the ESC button.
Wrong code alarm
- When the machine is turned on, the authorization
code display is shown if the anti-theft system is
selected as an optional equipment. Wrong code
display appears on the IC when the operator or
machine owner has entered the wrong code. After
3 inputs of an incorrect code, the authorization will
be limited for 5 minutes and a wrong code alarm
will send to the CareTrack portal. The default
code lock's delay time is 2 minutes and it can be
changed with Volvo's service tool.
V1112073
2
3
1
CareTrack unit
1 WECU
2 Satellite modem
3 Back-up battery
V1155509
Machine immobilized
- Geofence broken
The machine is
immobilized due to:
- Timefence broken
- System tampered
- Machine movement
- Battery power lost
- Remote immobilization
- No coverage
V1137931
Enter operator code:
0
Wrong code!
Too many incorrect codes!
Time to next attempt:
XX:XX
Enter operator code
Wrong code
Too many incorrect codes
Time to next attempt
Instrument panels
Display unit 69