Stopping
1 Select as level ground as possible to park the
machine.
2 Lower the attachment to the ground.
3 Leave the engine running at low idling speed (I2-
mode) for approx. 2 minutes before shutting off
the engine. Otherwise the lubrication of the
turbocharger may be disrupted, resulting in
shorter service life and great risk of bearing
seizure.
4 Turn the ignition switch to stop position.
5 Move the control lockout lever down to lock the
hydraulic system securely.
6 If the machine is to be left for any length of time,
the battery disconnect switch should be turned
off.
Keep in mind that the risk of theft and burglary can
be minimised by:
- Removing the ignition switch when the machine
is left unattended.
- Locking doors and covers after working hours.
- Turning off the current with the battery disconnect
switch.
- Parking the machine where the risk of theft,
burglary and damage is minimised.
- Removing all valuables from the cab, such as
mobile phone, computer, radio and bags.
- Chaining the machine.
By etching in the PIN-number or the national licence
plate number of the machine on its windows, it is
easier to identify stolen machines.
196
Operating instructions
Stopping
To Next Page
Loading...
