NOTICE
To reduce the risk of fire the seat heating must be
switched off before you leave the seat.
Air suspension seat (optional equipment)
The operator seat is also available with air
suspension for even better comfort. The adjusting
possibilities are the same as for a mechanical
suspension seat except adjustment of air
suspension.
To adjust air suspension of the seat,
1 Turn the ignition switch "ON" or start engine.
2 Lift operator's weight off the seat.
3 Lift and hold the lever (A) until air bag is
completely inflated.
4 Sit and push down the lever (A) to deflate.
5 Stop deflating when seat starts lowering. The set
weight should be within the green zone of the
ride indicator.
NOTE!
After adjusting the suspension with operator's
weight, the suspension height should be in the
position within suspension stroke.
A Adjusting lever
B Ride indicator
Other controls
Operator comfort
115
To Next Page
Loading...
