Transporting machine
Measurements before transporting
machine
NOTICE
The person in charge of the transport must see to
that loading, positioning, lashing and transporting
the machine on a trailer or other vehicle is done
according to applicable laws and regulations for the
country or state in question. For further information,
contact your dealer.
NOTICE
If vandal protection is installed on the machine, it
should be removed before the machine is
transported. Check local or national regulations.
Total and disassembled specifications,
weight and dimension
The weight and dimension are very useful for
estimating the method for how the disassembled
parts are supposed to be transported. To comply
with the laws and regulations in a certain region,
use the specifications for total and disassembled
parts. See pages
384
,
377
and
388
.
Sunlight protection, closing
The sunlight protection may be opened while
transporting the machine because of vibration.
Therefore it should be closed tightly not to be
opened.
202
Operating instructions
Transporting machine
To Next Page
Loading...
