The hydraulic breaker is not designed to lift or
transport loads. The hydraulic breaker may easily
be damaged and it is very dangerous.
Avoid moving and collecting objects using the
hydraulic breaker.
The best working area is in the longitudinal direction
of the undercarriage and within an approximate 45°
sector in both directions (A).
Do not operate the hydraulic breaker in area (B).
The machine can be unstable and undercarriage
components may fail as a result of excessive loads
on the undercarriage.
A
Longitudinal direction of the
undercarriage
B
Across undercarriage: not
recommended
Operating techniques
Hammer
255
To Next Page
Loading...
