Operating the Autosampler 118
4
Monitoring a Stat Run
When the Stat Run begins, the Stat Run Status screen (Figure 4-24) appears.
Figure 4-24 Status: Stat Run
The Stat Run Status screen displays:
• Step and Vial Number – Appears in upper-right corner, along with a blinking cursor
that indicates that the run is in progress.
• Vial Number – Displays current vial number.
• Inj – Displays the current injection and number of injections per vial on the current
step.
• Volume – Displays the volume injected.
• Runtime – Displays the run time for the current injection.
• Time Remaining – Displays the time remaining on the current Stat run.
Stopping a Stat Run
Note: Stopping a Stat run aborts the Auto Run. The autosampler does not return and
execute the remaining steps of the Auto Run.
STAT 28
i
Status: Stat Run
Vial #
Inj
Volume ( 1)
Runtime (min)
Time Remaining (min)
Stop
Run
Auto
Page
1
1
10.0
12.0
8.6
Stat
Run
Step 1 Vial1
1
of 2
10.0
12.0
8.6
20.6
To Next Page
Loading...
