Waters 717plus - 3.6 Configuring the Autosampler

Configuring the Autosampler 65
3
3.6 Configuring the Autosampler
Configuring the Waters 717plus Autosampler requires:
• Setting parameters to enable the autosampler to communicate with other modules in
the LC system
• Recording changes to autosampler hardware (syringe size and sample loop volume)
3.6.1 Overview of Configuration
Refer to the Autosampler Configuration flowchart (Figure 3-8) for a 717plus configuration
overview.
Ta b l e 3 - 2
provides a summary of parameters from the Configuration Pages.