Weber ALPHA COMPACT - Page 31

Chapter 6 Installation and Initial Operation Alpha Compact 32708612
Version: 14.12.2012 page 31 of 135
Fig. 5-1: Packaging Examples
Pos. Description
A
PACKAGING EXAMPLE WITH CARDBOARD BOX OR BOX
B
PACKAGING EXAMPLE WITH PROTECTIVE CABINET
1
STRETCH FOIL
2
PALLET
3
TRANSPORT SECURING SCREW
4
RUBBER FEET
5
STRAPS
Instruction
Please transport the labeler to the installation site as follows:
Step Procedure
1
Transport the labeler to its installation site (within a radius of 3m). The ex-
act positioning will be arranged during installation by a technician of the
Bluhm Weber Group.
Straps are tensioned and may lash back uncontrolled when it is cut
through and may cause severe injuries.
2
Remove foil packaging and straps (if available). Without protective cabinet,
go on with Step 5.
3
Remove all transportation safety device screws, if available, from rubber
feet (s. Fig. 5-2:
).