Chapter 3 WCDMA Non-Call Mode
RF Generator
WCDMA Options Version 6.20
87
RF Generator
To gain access to this menu, push the [RF Gen] marker tab while working with
the Generator/Analyzer. Also, after pushing the
Gen/Ana softkey from the
Welcome screen as described in Overview the RF Generator menu will be selected
by default.
This menu allows you to set the parameters of the RF Generator.
The RF Generator can be set to generate radio signals at a defined carrier
frequency.
Modulation can be FM or WCDMA – or the signals can be totally unmodulated
(CW) in order to stimulate pure RF circuitry.
To Next Page
Loading...
