WILLTEK 4403 - Stop; Wait; Screen Commands

Chapter 6 RAPID!
Commands
162 WCDMA Options Version 6.20
STOP
WAIT
Screen commands These commands control the screen output of the 4400.
The following screen commands are available in RAPID!:
Parameters
anyText can be any text not exceeding the current line.
Note: The program line extension symbol can’t be used
on REM lines.
Description
Enables you to include comments in the programs. Com-
ments not only help other people to maintain your code;
it might well be that you need some hints to understand
your own code when you look at it from a long distance
in time.
Example
REM The next line will define a vari-
able
LET i = 42 ‘ Who does not call his
integers "i"
Syntax
STOP
Parameters
STOP does not have any parameters.
Description
Stops the program execution, but does not end the pro-
gram (important e.g. to keep the values of variables when
debugging a program).
Example
If n = 10 then STOP
Syntax
WAIT msec
Parameters
msec specifies the time the program will wait in milli-
seconds.
msec can only be entered as an integer value.
The maximum time is 32,767 milliseconds.
Description
Stops the program execution for the duration of the time
specified in parameter
msec.
Example
PRINT "Please connect mobile now"
WAIT 2000
Prints user information and then halts the program for
two seconds.
Command Short description
CLS Clears the screen.
INPUT Waits for a user entry and stores the value.