WILLTEK 4403 - The Softkeys of this Menu; MS Power Supply

Chapter 4 Tools
Utilities
WCDMA Options Version 6.20
121
The softkeys of this menu
MS power supply Push the [Power Supply] marker tab of the Utilities section to gain access to
this menu. It offers you the controls and measurements for two options: the MS
Power Supply Option and the Current Measurement Option.
The MS Power Supply is an option to the 4400, therefore this screen is accessible
only if the MS Power Supply Option is installed.
The MS Power Supply Option is a prerequisite for the Current Measurement
Option. The Current Measurement Option shows you the current that the mobile
phone draws from the battery simulated by the 4400.
The measurement results from the Current Measurement Option are visible only
if this option is installed.
Shows the trace of the procedures, running on the internal
PC.
Shows the trace of the procedures, running on the internal
DSP.
Shows internal messages and error trace.
This softkey can be used to copy the Error Trace onto a floppy
disk.
Before pushing this softkey, insert a disk in the 4400’s disk
drive. A push on this softkey copies the internal message and
error trace onto the floppy disk. A text file named
INFO-
DAT.TXT
will be created, containing the internal message
and error trace in ASCII format. If the trace is empty, the file
will be empty as well.
The Error Trace file may be requested by Willtek Product Spe-
cialists when reporting a problem.