Chapter 4 Tools
Configuration
112 WCDMA Options Version 6.20
network.
If there is no ping even when the 4400 is switched on, the address is not
a valid IP address in this network or network segment, or the 4400 is not
properly connected to the network (check cabling).
– Check if the remote PC runs an NFS server software. UNIX-like operating
systems typically include an NFS server; applications for Windows are
commercially available.
Parallel port settings
Printer — Selection field. Selects the type of the external printer, connected to
the 4400’s parallel port (“CENTRONICS”).
The possible settings are:
– HP DeskJet 400 (default)
– HP DeskJet 680
– HP Laserjet
– Canon
– Epson Stylus Color
– Epson Stylus Color II
– Epson Stylus Color IIs
– Epson Stylus Color 200
– Epson Stylus Color 400
– Epson Stylus Color 500
– Epson Stylus Color 600
– Epson Stylus Color 800
– Epson Stylus Color 1500
– Epson Stylus Color 1520
– Epson Stylus Color 3000
– Epson Stylus Pro
– Epson Stylus Pro XL
– Epson Stylus Pro XL+
– BMP File to floppy disk
Note: Setting
BMP File to floppy disk will output the current screen as
a bit-map file (*.BMP) on a disk inserted into the 4400’s disk drive. A prompt will
appear on-screen when the ‘printing to disk’ process starts. The printing can be
aborted by pushing the E
SCAPE function key or the corresponding key of the
external keyboard as long as the prompt is visible.
The bit-map file may then be used with standard word processing or DTP soft-
ware.
The size of a single bit-map file is approx. 305 kB; therefore four files will fit on
a disk.
To Next Page
Loading...
