WILLTEK 4403 - Whats New in Version 6.20; Features and Capabilities

Chapter 1 Overview
What’s new in version 6.20
WCDMA Options Version 6.20
3
What’s new in version 6.20
WCDMA Option:
– Inner Loop Power Control
– Open Loop Power Control
– Code Domain Specturm with Code Domain Power and Peak Code Domain
Error (PCDE)
– Support of all Reference Measurement Channels: 12.2 kbps, 64 kbps,
144 kbps and 384 kbps.
TD-SCMDA System Option (non-call mode):
– Code Domain Spectrum and RX/TX switch
GSM System Option:
Non-residual BER measurement with CRC check.
Features and capabilities
– Based on the multiformat, future-proof platform 4400
– Adaptable to individual needs with options including CDMA2000,
GSM/GPRS, EDGE, WCDMA, TD-SCDMA, Audio, Codec, MS Power Supply, MS
Current and TCP/IP
– Easy-to-use graphical user interface with external mouse, keyboard and
monitor
– Standard SCPI commands for remote control
– Built-in RAPID! for stand-alone automated procedures, allowing the user to
easily develop and run programs on the 4400
– DSP platform supports parallel testing of TX, RX and Audio
– Driver software available for Test Stand and Lab Windows CVI