Appendix A SCPI Command Reference
CALL subsystem
WCDMA Options Version 6.20
321
:CALL:WCDMa:UE:REGistration
:CALL:WCDMa:UE:REGistration:CLEar
Example
:CALL:WCDM:UE:POS?
The string delivered in this example could be:
"NET".
Syntax
:CALL:WCDMa:UE:REGistration?
Parameters
There are no parameters.
Description
This command will check if the UE has registered. If not, it will set the Status Register
Pending flag
Query
This query checks if the UE has registered with the Willtek 4400. Possible returns are
NO|YES.
Example
:CALL:WCDM:UE:REG?:CALL:WCDM:REG
Syntax
:CALL:WCDMa:UE:REGistration:CLEar
Parameters
There are no parameters.
Description
This command causes the Willtek 4400 to erase any stored information about a previ-
ous registration by a mobile.
Query
There is no query form of this command available.
Example
:CALL:WCDM:UE:REG?:CALL:WCDM:REG
To Next Page
Loading...
