WILLTEK 4403 - Page 461

Appendix A SCPI Command Reference
RFGenerator subsystem
WCDMA Options Version 6.20
439
:RFGenerator:WCDMa:MODulation:WCDMa:SCODe
:RFGenerator:WCDMa:MODulation:WCDMa:CCODe
:RFGenerator:WCDMa:MODulation:WCDMa:SFORmat
Query
The query form of this command returns the current setting. A query will return a
string, containing one of the predefined expressions explained above.
Example
:RFG:WCDMA:MOD:WCDM:BITP ONEZero
:RFG:WCDMA:MOD:WCDM:BITP?
Value returned in this example "ONEZero"
.
Syntax
:RFGenerator:WCDMa:MODulation:WCDMa:SCODe <int1>
Parameters
int1 is an integer number. The minimum value is 0, the maximum value 15. The ini-
tial default is 0.
Description
This command sets the DPCH (secondary) scrambling code for the WCDMA signal.
Query
The query form of this command will return the current setting. The string delivered
back will contain one integer.
Example
:RFG:WCDMA:MOD:WCDM:SCOD 10
:RFG:WCDMA:MOD:WCDM:SCOD?
Value returned in this example: 10
.
Syntax
:RFGenerator:WCDMa:MODulation:WCDMa:CCODe <int1>
Parameters
int1 is an integer number. The minimum value is 3, the maximum value 511. The
initial default is 3.
Description
This command sets the channelization code for the WCDMA signal.
Query
The query form of this command will return the current setting. The string delivered
will contain one integer.
Example
:RFG:WCDMA:MOD:WCDM:CCOD 10
:RFG:WCDMA:MOD:WCDM:CCOD?
Value returned in this example: 10
.
Syntax
:RFGenerator:WCDMa:MODulation:WCDMa:SFORmat <int1>
Parameters
int1 is an integer number. The minimum value is 0, the maximum value 16. The ini-
tial default is 11.
Description
This command sets the slot format for the WCDMA signal
.
Query
The query form of this command will return the current setting. The string delivered
back will contain one integer.
Example
:RFG:WCDMA:MOD:WCDM:SFOR 10
:RFG:WCDMA:MOD:WCDM:SFOR?
Value returned in this example: 10
.