6-4 Phaser 3600 Printer Service Manual
Cleaning and Maintenance
Control Panel Maintenance
Cleaning the Drum
To clean the Drum from the Control Panel:
1. Turn on the printer and wait for the “Ready’ display on the Control Panel.
2. Press Menu > System Setup > Maintenance > Clean Drum.
3. Select Print Yes.
o
e
A test page will print notifying you that the Clean Drum cycle has
successfully completed.
Cleaning the Fuser
To clean the Fuser from the Control Panel:
1. Turn on the printer and wait for the “Ready’ display on the Control Panel.
2. Press Menu > System Setup > Maintenance > Clean Fuser.
3. Select Print Yes.
o
e
A test page will print notifying you that the Clean Fuser cycle has
successfully completed.