Xerox Phaser 3600

3-22 Phaser 3600 Printer Service Manual
Error Messages
Output Tray is Full
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Main Board, PL1.1.19
■ Tray Full Actuator, PL1.3.8
■ Tray Full Sensor, PL1.3.95
■ “Sensor to Main Board Wiring Diagram”
on page 9-14
■ “Main Drive/Joint Board and Optional
Tray Wiring Diagram” on page 9-15
Step Actions and Questions Yes No
1. Check the Tray Full Sensor and
actuat
or for obvious damage.
Is the actuator damaged?
Replace the
actuator
(page 7-45).
Go to Step 2.
2. Use diagnostics to test the Tray Full
Sens
or.
Does the sensor operate correctly?
Replace the Main
Board
(page 7-39).
Replace the Tray
Full Sensor
(page 7-23).