Xerox Phaser 3600

Phaser 3600 Printer Service Manual 7-7
Service Parts Disassembly
Left Cover (PL 1.2.2)
1. Disconnect the power cord.
2. Remove the Duplex Unit (page 7-37).
3. Open the Rear Cover for access to the top rear screw.
4. Remove the 2 rear screws of the cover.
5. Slide the left cover towards the rear of the printer to release the 3 tabs on
the top and 3 bottom hooks securing it to the printer.
Replacement Note
Before reinstalling the cover, remove the duplex unit.
When reinstalling the cover, insert the 3 bottom hooks first, then slide
the c
over from the rear to the front. Make sure the cover is securely
behind the 3 tabs.
s3600-028