Xerox Phaser 3600

7-50 Phaser 3600 Printer Service Manual
Service Parts Disassembly
Pre-transfer Lamp (PTL) Board (PL 1.3.71)
1. Remove the Right Cover (page 7-6).
2. Remove the Left Cover (page 7-7).
3. Remove the Top Cover (page 7-10).
4. Remove the Registration Assembly (page 7-41).
5. Disconnect the wiring harness (CN22) from the Main Board.
6. Remove 1 screw and take out the PTL board.
PTL PBA
s3600-062
PTL Upper
Terminal
PTL PBA