Xerox Phaser 3600

7-28 Phaser 3600 Printer Service Manual
Service Parts Disassembly
Tray 1 (MPT) Pick Roller Only (PL 1.3.2.4)
N
o
t
e
If you are only removing the Pick Roller, and not the shaft, it may be
necessary to rotate the shaft, release the solenoid, and then rotate the
shaft gear clockwise to position the roller properly.
Caution
Do not break the pick shaft by trying to force the Pick Roller off.
1. Slide the idle gears outward. Release the locking tab on the Pick Roller
Assembly and slide the roller to the right.
Idle
s3600-043