Xerox Phaser 3600

7-24 Phaser 3600 Printer Service Manual
Service Parts Disassembly
Sub Toner Low Sensor Board (PL1.3.47)
1. Remove the Right Cover (page 7-6).
2. Remove the Left Cover (page 7-7).
3. Remove the Top Cover (page 7-10).
4. Remove the Laser Scan Unit (page 7-70).
5. Remove the LSU Lower Cover (page 7-72).
6. Disconnect all connectors running to the Toner Sensor Board.
7. Remove 2 screws securing the Toner Sensor Board to the LSU cover.
8. Release the 2 locking tabs to remove the board.
Springs
s3600-069