Xerox Phaser 6120 Service Manual

Acronym and Terminology Definitions Table
Phaser® 6120 Color Laser Printer Service Manual
A-9
lb. Pound
LCD Liquid Crystal Display
LD Laser Diode
LOCK Motor Off (Bad Motor Failure)
LVPS Low Voltage Power Supply
M# Motor
MB Megabyte
MCU Machine Control Unit
MHz Megahertz
mm Millimeters
MP Multiple Page Job
NIC Network Interface Card
NVRAM Non-Volatile Random Access Memory
OPC Organic Photo Conductor
Parameter Chip NVRAM
PC Photo Conductor (sensor)
PCL Printer Command Language
PF Lower Feeder Unit
PH Unit Laser Unit
PPM Pages Per Minute
PS PostScript
PU Power Unit or LVPS
PWB-A or
Mechanical Control
Board
Engine Control Board
PWB-A DU Duplex Board
PWB-A-PF Lower Feeder Board
PWB-C Waste Toner Full Detection Board
PWB-OP Control Panel
PWB-P
Print Control Board
Image Processor Board
Qty Quantity
RAM Random Access Memory
REM Motor On / Solenoid On
Term Definition

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm