Xerox Phaser 6120 Service Manual

Misfeeds and Paper Jams
Phaser® 6120 Color Laser Printer Service Manual
4-4
Misfeeds and Paper Jams
Misfeed or Jam Control Panel Display
When a media misfeed or jam occurs, the printer shows the corresponding media misfeed
status by means of the Error indicator and status message on the Control Panel.
For details on each status message, see Print Engine Adjustments/Settings on page 3-1.
Misfeed/Jam Clearing Procedure
In order to reset the printer display, you must follow the steps detailed below.
1. Open the relevant cover.
2. Clear the sheet of misfed media.
3. Close the cover.
4139fs4502c0
4139F4E502DA

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm