Xerox Phaser 6120

Maintenance Procedures
Phaser® 6120 Color Laser Printer Service Manual
2-14
Fuser
Warning: Before replacing the Fuser, ensure that it has had time to cool down.
Replacement Procedure
1. Remove the Rear Cover. See Rear Cover on page 5-4.
2. Remove the Left Cover. See Left Cover on page 5-5.
3. Remove the screws securing the metal plate, and then remove the plate [1].
4. Disconnect two connectors (PJ6, PJ71) [2] from the PWB-A (Engine Control Board) [1].
5. Disconnect the two connectors [4] (black and white) of the Fusing Safety Switch [3].
shield_pla
te
[1]
[2]
[1]
4139fs2005f0
[4]
[3]
4139fs2006c1