ENGINE
3-18
15.Fill:
• Coolant reservoir
(with the recommended coolant to the maxi-
mum level mark “a”)
16.Install:
• Coolant reservoir cap
17.Start the engine, warm it up for several min-
utes, and then stop it.
18.Check:
• Coolant level
Refer to “CHECKING THE COOLANT LEV-
EL” on page 3-15.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
19.Install:
• Coolant reservoir cover
• Muffler
Refer to “ENGINE REMOVAL” on page 5-1.
• Fuel tank
Refer to “FUEL TANK” on page 7-1.
a
To Next Page
Loading...
