CABLE ROUTING
2-46
1. Wire harness
2. Front right turn signal light
3. Front left turn signal light
4. Main switch couplers
5. Front right turn signal light coupler
6. Front left turn signal light coupler
7. Meter assembly couplers
8. Air temperature sensor lead
9. Meter assembly lead
10. Main switch lead
11. Headlight lead
12. Air temperature sensor
A. Route the main switch lead that branches off from
the wire harness behind the other leads.
B. Route the meter assembly lead that branches off
from the wire harness in front of the meter
assembly couplers and front turn signal light
couplers, and then wrap the protective covering
around the lead and couplers.
C. Fasten the wire harness, front turn signal light
leads, meter assembly lead, and air temperature
sensor lead with the plastic band, making sure to
align the white tape on the wire harness, front turn
signal light leads, and meter assembly lead with
the band.
D. Route the main switch lead behind the wire
harness and meter assembly lead.
E. Fasten the main switch lead at the white tape to
the plastic band bracket with a plastic locking tie.
F. Wrap the protective covering around the main
switch couplers.
G. Fasten the headlight lead with the holder.
H. To headlight
I. To wire harness
To Next Page
Loading...
