YASKAWA CR700 Technical Manual

3.4 Keypad Operation
160 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
◆ Examine User Custom Parameters
The User Custom Parameters show the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter
32]. This lets users to quickly access and change settings to these parameters.
Note:
The User Custom Parameters always show A1-06 [Application Selection] at the top of the list. The A2-01 to A2-32 settings change when
the A1-06 setting changes, which makes it easier to set and reference the necessary parameter settings.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [User Custom Parameters], then push .
4. Push or to show the parameter to examine.
5. To re-edit a parameter, push or , select the parameter to edit, then push .
6. Push or to select the digit, then push or to change the value.

YASKAWA CR700 Specifications

General

Model	CR700
Category	DC Drives
Protection Class	IP20
Output Power	0.5 to 300 HP
Horsepower Range	0.5 - 300 HP
Communication Interface	RS-485
Protection Features	Overcurrent, Overvoltage, Short Circuit